ragflow/docs/guides/deploy_local_llm.mdx

---
sidebar_position: 7
slug: /deploy_local_llm
---

# Deploy a local LLM
import Tabs from '@theme/Tabs';
import TabItem from '@theme/TabItem';

Run models locally using Ollama, Xinference, or other frameworks.

RAGFlow supports deploying models locally using Ollama, Xinference, IPEX-LLM, or jina. If you have locally deployed models to leverage or wish to enable GPU or CUDA for inference acceleration, you can bind Ollama or Xinference into RAGFlow and use either of them as a local "server" for interacting with your local models.

RAGFlow seamlessly integrates with Ollama and Xinference, without the need for further environment configurations. You can use them to deploy two types of local models in RAGFlow: chat models and embedding models.

:::tip NOTE
This user guide does not intend to cover much of the installation or configuration details of Ollama or Xinference; its focus is on configurations inside RAGFlow. For the most current information, you may need to check out the official site of Ollama or Xinference.
:::

## Deploy a local model using Ollama

[Ollama](https://github.com/ollama/ollama) enables you to run open-source large language models that you deployed locally. It bundles model weights, configurations, and data into a single package, defined by a Modelfile, and optimizes setup and configurations, including GPU usage.

:::note
- For information about downloading Ollama, see [here](https://github.com/ollama/ollama?tab=readme-ov-file#ollama).
- For information about configuring Ollama server, see [here](https://github.com/ollama/ollama/blob/main/docs/faq.md#how-do-i-configure-ollama-server).
- For a complete list of supported models and variants, see the [Ollama model library](https://ollama.com/library).
:::

To deploy a local model, e.g., **Llama3**, using Ollama: 

### 1. Check firewall settings

Ensure that your host machine's firewall allows inbound connections on port 11434. For example:
   
```bash
sudo ufw allow 11434/tcp
```
### 2. Ensure Ollama is accessible

Restart system and use curl or your web browser to check if the service URL of your Ollama service at `http://localhost:11434` is accessible.
   
```bash
Ollama is running
```

### 3. Run your local model

```bash
ollama run llama3
```
<details>
  <summary>If your Ollama is installed through Docker, run the following instead:</summary>

   ```bash
   docker exec -it ollama ollama run llama3
   ```
</details>

### 4. Add Ollama

In RAGFlow, click on your logo on the top right of the page **>** **Model Providers** and add Ollama to RAGFlow: 

![add ollama](https://github.com/infiniflow/ragflow/assets/93570324/10635088-028b-4b3d-add9-5c5a6e626814)


### 5. Complete basic Ollama settings

In the popup window, complete basic settings for Ollama:

1. Because **llama3** is a chat model, choose **chat** as the model type.
2. Ensure that the model name you enter here *precisely* matches the name of the local model you are running with Ollama.
3. Ensure that the base URL you enter is accessible to RAGFlow.
4. OPTIONAL: Switch on the toggle under **Does it support Vision?** if your model includes an image-to-text model.

:::caution NOTE
- If your Ollama and RAGFlow run on the same machine, use `http://localhost:11434` as base URL.
- If your Ollama and RAGFlow run on the same machine and Ollama is in Docker, use `http://host.docker.internal:11434` as base URL. 
- If your Ollama runs on a different machine from RAGFlow, use `http://<IP_OF_OLLAMA_MACHINE>:11434` as base URL. 
:::

:::danger WARNING
If your Ollama runs on a different machine, you may also need to set the `OLLAMA_HOST` environment variable to `0.0.0.0` in **ollama.service** (Note that this is *NOT* the base URL):

```bash
Environment="OLLAMA_HOST=0.0.0.0"
```

See [this guide](https://github.com/ollama/ollama/blob/main/docs/faq.md#how-do-i-configure-ollama-server) for more information.
:::

:::caution WARNING
Improper base URL settings will trigger the following error:
```bash
Max retries exceeded with url: /api/chat (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0xffff98b81ff0>: Failed to establish a new connection: [Errno 111] Connection refused'))
```
:::

### 6. Update System Model Settings

Click on your logo **>** **Model Providers** **>** **System Model Settings** to update your model: 
   
*You should now be able to find **llama3** from the dropdown list under **Chat model**.*

> If your local model is an embedding model, you should find your local model under **Embedding model**.

### 7. Update Chat Configuration

Update your chat model accordingly in **Chat Configuration**:

> If your local model is an embedding model, update it on the configruation page of your knowledge base.

## Deploy a local model using Xinference

Xorbits Inference ([Xinference](https://github.com/xorbitsai/inference)) enables you to unleash the full potential of cutting-edge AI models.

:::note
- For information about installing Xinference Ollama, see [here](https://inference.readthedocs.io/en/latest/getting_started/).
- For a complete list of supported models, see the [Builtin Models](https://inference.readthedocs.io/en/latest/models/builtin/).
:::

To deploy a local model, e.g., **Mistral**, using Xinference:

### 1. Check firewall settings

Ensure that your host machine's firewall allows inbound connections on port 9997. 

### 2. Start an Xinference instance

```bash
$ xinference-local --host 0.0.0.0 --port 9997
```

### 3. Launch your local model

Launch your local model (**Mistral**), ensuring that you replace `${quantization}` with your chosen quantization method:

```bash
$ xinference launch -u mistral --model-name mistral-v0.1 --size-in-billions 7 --model-format pytorch --quantization ${quantization}
```
### 4. Add Xinference

In RAGFlow, click on your logo on the top right of the page **>** **Model Providers** and add Xinference to RAGFlow: 

![add xinference](https://github.com/infiniflow/ragflow/assets/93570324/10635088-028b-4b3d-add9-5c5a6e626814)

### 5. Complete basic Xinference settings

Enter an accessible base URL, such as `http://<your-xinference-endpoint-domain>:9997/v1`. 
> For rerank model, please use the `http://<your-xinference-endpoint-domain>:9997/v1/rerank` as the base URL.

### 6. Update System Model Settings

Click on your logo **>** **Model Providers** **>** **System Model Settings** to update your model.
   
*You should now be able to find **mistral** from the dropdown list under **Chat model**.*

> If your local model is an embedding model, you should find your local model under **Embedding model**.

### 7. Update Chat Configuration

Update your chat model accordingly in **Chat Configuration**:

> If your local model is an embedding model, update it on the configruation page of your knowledge base.

## Deploy a local model using IPEX-LLM

[IPEX-LLM](https://github.com/intel-analytics/ipex-llm) is a PyTorch library for running LLMs on local Intel CPUs or GPUs (including iGPU or discrete GPUs like Arc, Flex, and Max) with low latency. It supports Ollama on Linux and Windows systems.

To deploy a local model, e.g., **Qwen2**, using IPEX-LLM-accelerated Ollama:

### 1. Check firewall settings

Ensure that your host machine's firewall allows inbound connections on port 11434. For example:
   
```bash
sudo ufw allow 11434/tcp
```

### 2. Launch Ollama service using IPEX-LLM

#### 2.1 Install IPEX-LLM for Ollama

:::tip NOTE 
IPEX-LLM's supports Ollama on Linux and Windows systems.
:::

For detailed information about installing IPEX-LLM for Ollama, see [Run llama.cpp with IPEX-LLM on Intel GPU Guide](https://github.com/intel-analytics/ipex-llm/blob/main/docs/mddocs/Quickstart/llama_cpp_quickstart.md):
- [Prerequisites](https://github.com/intel-analytics/ipex-llm/blob/main/docs/mddocs/Quickstart/llama_cpp_quickstart.md#0-prerequisites)
- [Install IPEX-LLM cpp with Ollama binaries](https://github.com/intel-analytics/ipex-llm/blob/main/docs/mddocs/Quickstart/llama_cpp_quickstart.md#1-install-ipex-llm-for-llamacpp)

*After the installation, you should have created a Conda environment, e.g., `llm-cpp`, for running Ollama commands with IPEX-LLM.*

#### 2.2 Initialize Ollama

1. Activate the `llm-cpp` Conda environment and initialize Ollama: 

<Tabs
  defaultValue="linux"
  values={[
    {label: 'Linux', value: 'linux'},
    {label: 'Windows', value: 'windows'},
  ]}>
  <TabItem value="linux">
  
  ```bash
  conda activate llm-cpp
  init-ollama
  ```
  </TabItem>
  <TabItem value="windows">

  Run these commands with *administrator privileges in Miniforge Prompt*:

  ```cmd
  conda activate llm-cpp
  init-ollama.bat
  ```
  </TabItem>
</Tabs>

2. If the installed `ipex-llm[cpp]` requires an upgrade to the Ollama binary files, remove the old binary files and reinitialize Ollama using `init-ollama` (Linux) or `init-ollama.bat` (Windows).
   
   *A symbolic link to Ollama appears in your current directory, and you can use this executable file following standard Ollama commands.*

#### 2.3 Launch Ollama service

1. Set the environment variable `OLLAMA_NUM_GPU` to `999` to ensure that all layers of your model run on the Intel GPU; otherwise, some layers may default to CPU.
2. For optimal performance on Intel Arc™ A-Series Graphics with Linux OS (Kernel 6.2), set the following environment variable before launching the Ollama service:

   ```bash 
   export SYCL_PI_LEVEL_ZERO_USE_IMMEDIATE_COMMANDLISTS=1
   ```
3. Launch the Ollama service:

<Tabs
  defaultValue="linux"
  values={[
    {label: 'Linux', value: 'linux'},
    {label: 'Windows', value: 'windows'},
  ]}>
  <TabItem value="linux">

  ```bash
  export OLLAMA_NUM_GPU=999
  export no_proxy=localhost,127.0.0.1
  export ZES_ENABLE_SYSMAN=1
  source /opt/intel/oneapi/setvars.sh
  export SYCL_CACHE_PERSISTENT=1

  ./ollama serve
  ```

  </TabItem>
  <TabItem value="windows">

  Run the following command *in Miniforge Prompt*:

  ```cmd
  set OLLAMA_NUM_GPU=999
  set no_proxy=localhost,127.0.0.1
  set ZES_ENABLE_SYSMAN=1
  set SYCL_CACHE_PERSISTENT=1

  ollama serve
  ```
  </TabItem>
</Tabs>


:::tip NOTE
To enable the Ollama service to accept connections from all IP addresses, use `OLLAMA_HOST=0.0.0.0 ./ollama serve` rather than simply `./ollama serve`.
:::

*The console displays messages similar to the following:*

![](https://llm-assets.readthedocs.io/en/latest/_images/ollama_serve.png)

### 3. Pull and Run Ollama model

#### 3.1 Pull Ollama model

With the Ollama service running, open a new terminal and run `./ollama pull <model_name>` (Linux) or `ollama.exe pull <model_name>` (Windows) to pull the desired model. e.g., `qwen2:latest`:

![](https://llm-assets.readthedocs.io/en/latest/_images/ollama_pull.png)

#### 3.2 Run Ollama model

<Tabs
  defaultValue="linux"
  values={[
    {label: 'Linux', value: 'linux'},
    {label: 'Windows', value: 'windows'},
  ]}>
  <TabItem value="linux">

  ```bash
  ./ollama run qwen2:latest
  ```
  </TabItem>
  <TabItem value="windows">

  ```cmd
  ollama run qwen2:latest
  ```

  </TabItem>
</Tabs>

### 4. Configure RAGflow

To enable IPEX-LLM accelerated Ollama in RAGFlow, you must also complete the configurations in RAGFlow. The steps are identical to those outlined in the *Deploy a local model using Ollama* section:

1. [Add Ollama](#4-add-ollama)
2. [Complete basic Ollama settings](#5-complete-basic-ollama-settings)
3. [Update System Model Settings](#6-update-system-model-settings)
4. [Update Chat Configuration](#7-update-chat-configuration)

## Deploy a local model using jina 

To deploy a local model, e.g., **gpt2**, using jina:

### 1. Check firewall settings

Ensure that your host machine's firewall allows inbound connections on port 12345.

```bash
sudo ufw allow 12345/tcp
```

### 2. Install jina package

```bash
pip install jina
```

### 3. Deploy a local model

Step 1: Navigate to the **rag/svr** directory.

```bash
cd rag/svr
```

Step 2: Run **jina_server.py**, specifying either the model's name or its local directory: 

```bash
python jina_server.py  --model_name gpt2
```
> The script only supports models downloaded from Hugging Face.